1.
Minilathe Center Finder
The lazy man's way of avoiding use of a tailstock center (Rudy used a tailstock center). The larger section of the plunger is 0.260, allowing about +/- 30 ...
2.
GadgetBuilder's MiniLathe Site
When it's a die holder -- you get two for the price of one with this approach. A center finder is one way to simplify use of the mini-lathe's 4 jaw chuck. ...
3.
Rockwell 10" Metal Lathe
The pictures above show the lathe from the same perspective before and after painting. I visited it twice before purchase so I had some idea of the ...
4.
Threading Tool Sharpener
A Jig to Sharpen Threading Tools. And Other Lathe Bits Too. Jig to sharpen threading bits. Sharpening bits freehand for thread cutting on the lathe is ...
5.
GadgetBuilder's MiniLathe Site
As most visitors probably know, the mother lode of mini-lathe info is found ... A taper attachment for the mini lathe; it works better since adding struts ...
6.
Threading Tool Sharpener
A Jig to Sharpen Threading Tools. And Other Lathe Bits Too. Jig to sharpen threading bits. Sharpening bits freehand for thread cutting on the lathe is ...
7.
Cutter Grinder
Universal Cutter Grinder from China. Click to Enlarge. Chinese copy of Deckel SO. A cutter grinder has been high on my tool list because most all my end ...
8.
MiniLathe Carriage Stop and Dial Holder
A carriage stop is a most useful addition to the minilathe; some time ago I made a clamp to use on the rear ways but hadn't found a design I really liked ...
9.
Optical Punch
An optical punch is helpful in placing a punch mark accurately on a scribed point. A center punch can then be used to enlarge the mark. ...
10.
Building a Steady Rest
I needed a steady rest to build the Broadley spindle for the Brooks grinder ... Threading with the Steady Here the steady is being used while threading the ...
